FREE DELIVERY for orders over $100
Shop Online
ACD Cal 2000LT Calibration Gas Instrument (CL2, H2, HCN, H2S)
larger imageMove mouse over the image to magnify
The CAL 2000 LT is the calibration gas instrument of choice for the user who does not need variable flow rates or concentrations. The CAL 2000 LT is available in pre-set flow-rates of 0.5 or 1.0 PPM.
Enquire
750-0603-LT

ACD Cal 2000LT Calibration Gas Instrument (CL2, H2, HCN, H2S)

Gases supported: Cl2 H2 HCN H2S
  • Mass flow feedback and source monitoring provide our highest level of accuracy.
  • 10 and 25 hour sources available
  • English, French, German and Spanish user interfaces are available.
  • CSA certified and intrinsically safe.
View CAL 2000LT Brochure:

Accuracy, Wide Range of Gases

The CAL 2000 LT is the calibration gas instrument of choice for the user who does not need variable flow rates or concentrations. The CAL 2000 LT is available in pre-set flow-rates of 0.5 or 1.0 PPM.
Field replaceable calibration gas sources (generating cells) provide a calibration standard for accurately testing Chlorine, Hydrogen, Hydrogen Cyanide, and Hydrogen Sulfide gas detectors with a single instrument.
Calibration gas sources (generating cells) are rated at ten or twenty-five hours over a range of 1 to 25 PPM in whole PPM increments. To change gas type or concentration simply insert a different source into the instrument.

Easy to Use

The CAL 2000 LT is microprocessor controlled and has an LCD display allowing easy user access to information such as source life is remaining as well as battery status, gas concentration and flow-rate. The sources are interchangeable and field replaceable and come with a one year warranty.

NIST Certified

The CAL 2000 LT calibration gas instrument has a built-in mass flow sensor that automatically compensates for altitude and temperature resulting in accurate cal gas everywhere you use it. Both the CAL 2000 LT instrument and the sources are NIST certified + 5% accurate for one year. Instruments and sources can be re-certified at the ACD factory. Best of all, each source provides up to 25 cylinders worth of gas at a fraction of the cost.

Calibration Gas Sources

10 and 25 hour sources are available.

Specifications

Chlorine (Cl2) 1.0 - 25.0 PPM
Hydrogen (H2) 1.0 - 25.0 PPM
Hydrogen Sulfide (H2S) 1.0 - 25.0 PPM
Hydrogen Cyanide (HCN) 1.0 - 25.0 PPM
 
Specify gas type and PPM concentration when ordering generating cells. Gas concentrations must be in whole PPM increments.
Air Flow Rate 0.5 or 1 LPM (specify when ordering)
Source Life 10 hours
Warm-up Time (to 90%) Approx. 5 minutes
L x W x H 8.50 x 4.25 x 3.00" (21.59 x 10.8 x 7.62 cm)
Weight 3 lb. (1360 g)
Operating Temperature 0° C to 50° C
Relative Humidity (intermittent use) 0 - 100%
Accuracy ±10%
Repeatability ±5%
Battery Power 4 alkaline "C"
Battery Life 10 hours

You might also be interested in ...

About safety.kiwi

safety.kiwi is operated by Accurate Instruments (NZ) Ltd.
Accurate is one of the few 100% New Zealand owned and operated safety instrumentation companies in New Zealand today. This is in a market dominated by larger foreign owned companies, yet we continue to operate as a strong independent supplier to the NZ market.

We specialize in the supply, service and support of safety equipment and safety systems to protect workers and their workplaces with some of the world’s top quality technical safety instruments available, yet our pricing is highly competitive and represents value for money.

We are instrument consultants, and endeavour to find the right solution for our client by careful analysis of the application and intended result. We pride ourselves on our professionalism, ethical industry responsibility, specialist advice and service, quality of product, and of course our people.

 

CONTACT US

FREEPHONE
 0800 500 380

192 Marua Road
Mt Wellington
Auckland 1051

VIEW MAP
4 Avenger Crescent
Wigram
Christchurch 8042

VIEW MAP