Refer a friend

Hi, You're receiving this email because {name} thinks the TD06 Trimdek® Anchor would interest you. The TD06 Trimdek® Fall Arrest Roof Anchor is a surface mounted stainless steel roof anchor to suit standard square rib metal roof profile sheeting with a minimum base metal thickness (BMT) of 0.42mm. 

The roof sheeting should be continually spanning a minimum three metal battens, purlins or timber roof battens (MGP10, 75mm x 34mm minimum) providing 360° protection in fall arrest and restraint applications.

The anchor is not to be utilised by more than one person at any time nor be subject to a load of more than 15kN in accordance with AS/NZS 1891.4 (Table 3.1). Do not use if the anchor does not firmly fit the roof sheet profile. The anchor is NOT to be used for fastening/tethering other items such TV antennae, satellite dishes, solar panels, shade structures etc.

The TD06 Trimdek® is limited to a 360 degree use and is not to be used for industrial rope access or work involving abseiling.

Specifications:

• Complies with AS 1891.4
• 14 Gauge 304 Stainless Steel
• 15kN - Rated for single person Fall Arrest
• Fits certain roof profiles such as Trimdek
• Patented design allows for easy retro fitting
• Installation is easy with surface mounted installation
• EPDM separation/flashing kit
• Includes Instruction Manual/Tech Data Sheet
• FOR SINGLE PERSON USE ONLY

TRIMDEK® ia a registered trademark of BlueScope Steel Limited For more information, please click Here Regards,