Hi,
You're receiving this email because {name} thinks the ACD MiniGen Calibration & Bump Gas Tester (CL2, H2, HCN, H2S, NH3) would interest you.
Versatile Calibration and Bump Testing
The MiniGen is the smallest, most lightweight and adaptive calibration gas source on the market. It is our lowest entry cost product as well as our simplest to use. It is certified to be intrinsically safe for operation on potentially explosive atmospheres. The MiniGen operates with interchangeable generating sources providing either fixed concentration output for calibration, or ‘bump’ output to drive your detector into alarm for operational verification. Available in hydrogen sulfide, chlorine, hydrogen, hydrogen cyanide and ammonia. The complete device fits into your shirt pocket and provides the equvalent of five 58 liter cylinders of gas with each generating source.
MiniGen Data Sheet:
Features
- Calibration sources available for Chlorine, Hydrogen, Hydrogen Sulphide, Hydrogen Cyanide, Ammonia.
- Interchangeable bump / calibration sources
- Automatic shut down after each test
- Alkaline battery powered
- Disposable generating source
- ATEX II3G EEx nL IIB T4 approved
- CSA NRTL/C Exia T-6 approved intrinsically safe with CE Mark
| Bump Test Sources |
|
| Chlorine (Cl2) |
> 5 PPM |
| Hydrogen (H2) |
> 25 PPM |
| Hydrogen Sulfide (H2S) |
> 10 PPM |
| Hydrogen Cyanide (HCN) |
> 25 PPM |
| Ammonia (NH3) |
> 50 PPM |
| Calibration Gas Sources |
|
| Chlorine (Cl2) |
1-25 PPM (Specify) |
| Hydrogen (H2) |
1-25 PPM (Specify) |
| Hydrogen Sulfide (H2S) |
1-25 PPM (Specify) |
| Hydrogen Cyanide (HCN) |
1-25 PPM (Specify) |
| Ammonia (NH3) |
1-50 PPM (Specify) |
| Cell Life |
Up to 1000 bump tests or 5 hours calibration |
| L x W x H |
10.4 x 6.0 x 3.0cm |
| Weight |
220 g |
| Operating Temperature |
0° C to 50° C |
| Relative Humidity (intermittent use) |
0 - 100% |
| Intrinsic Safety |
ATEX II3G EEx nL IIB T4 approved |
| Battery Power |
2 alkaline "AA" |
| Battery Life |
Approx. 10 hours |