Hi,
You're receiving this email because {name} thinks the Wolf Fluorescent Leadlamp would interest you.
The Wolf ATEX Portable Fluorescent Leadlamp is CE marked to the 94/9/EC ATEX Equipment Directive, allowing use in Zone 1 (Cat 2) IIC potentially explosive gas, vapour, mist and dust atmospheres, where a T3/T4 temperature class permits.
Available with twin side by side forward facing, or quad back to back 18W, 36W or 55W energy efficient fluorescent lamp combination's in a wide range of voltages (24V – 254V) the luminaire's are suitable for a multitude of applications where a temporary light is required for extended periods of time inside a potentially hazardous area.
The Luminaire's can be supplied with direct cable entries or fitted with ATEX plugs/sockets to allow the units to be instantly linked in series (plug and play), allowing for quick and easy installation over a large area.
Unistrut compatible mounting points located on the lamps provide a flexible installation solution allowing the luminaire's to be quickly and easily fixed in position on pipes, scaffold or a ferrous backdrop with magnetic fixings. A Wide range of Unistrut compatible products are available providing a quick, easy and low cost solution for mounting the lamps
Easy maintenance is a key feature of Wolf Portable Fluorescent Leadlamp range, re-lamping is simple and quick using standard compact fluorescent lamps readily available from electrical retailers, The operation takes no more than a few minutes and can be done by any competent electrical engineer.
Rugged construction, and compact design allow lights to be connected together in the explosive atmosphere while energised. A hanging/carrying strap is supplied as standard. Portable versions are supplied with an anti-static protective coating.
Compliant with the ATEX Equipment Directive and certified to the latest standards, including ‘End of Life’ protection circuit ballast for enhanced safety, in accordance with HSE safety notice 8/05.
A range of ATEX compliant transformers is available, rugged design and construction for use in or near hazardous locations.
Downloads:
Technical Information:
- Wolf Portable Leadlamp - LL-500
- 2 x 36W 180° or 4 x 36W 360° Worklight
- Peak Luminous Intensity at 5m 138 lux
- Peak Luminous Intensity at 2.5m 36 lux
- ATEX Approved for zone 1 & 2 explosive gas and dust atmospheres
Fitted with plugs and sockets, linkable in series
- Twin or quad lamp configuration
- Compact & robust design
- Wide voltage range 24V - 254V
- Uses standard compact fluorescent lamps for ease of maintenance
- Control ballast incorporates 'End of Life' protection circuit
- Integrated Unistrut compatible mounting points
- Emergency lamp variant available
(Photo and text courtesy of Wolf Safety Lamp Company)
For more information, please click
Here
Regards,